Undercoat & Metallic Paint Blaster

Good Under Pressure Graffit removal Undercoat & Metallic Paint Blaster product

For Use On Undercoat & Metallic Paint based Graffiti

Undercoat & Metallic Paint Blaster Graffiti Remover is a biodegradable product formulated for removing undercoating from porous & smooth surfaces; also can be used for removal of paint & marker from smooth & porous surfaces.


General Instructions for Use:

  • Test in a hidden area if being used on any painted or plastic surface for effect.
  • Apply by spray, brush, roller, or pump sprayer.
  • Allow to penetrate marks for an average of 1 minute (longer in cold temps.)
  • Remove with a clean dry cloth or rinse off with a water hose.
  • Note: If used on wood surfaces, allow to penetrate for 1 minute, longer in cold temps. Remove with water hose maximum nozzle pressure, or power wash with 15 Degree tip at 1,000-2,000 PSI maximum pressure.
  • Use water rinse or soap and water followed by water rinse for cleaning equipment
  • Repeat Process if necessary
  • Protective eye wear and chemical resistant gloves recommended during handling and use.
  • Provide ventilation if working in a confined area



View the Safety Data Sheet Here – https://goodunderpressure.com/safety-data-sheets/

Undercoat & Metallic Paint Blaster

Product Specification

Product Features/Benefits:

  • Opaque liquid
  • Fast removals just a few seconds for most uses.
  • Very efficient for the removal of spray on undercoating & metallic paints on most surfaces.
  • WET-unlike most graffiti removers very effective on pre-wet surfaces.
  • All temperature effective removals from freezing cold to very hot conditions.



4 L $80.00
4X4 L $300.00
20 L $360.00


Recommended for Removal On

Metals Steel, stainless, aluminium, galvanized, brass, copper, anodized aluminium.
Glass All types of glass, glazed tiles, ceramic, porcelain, polished stone, such as marble or granite.
Durable Painted Factory applied baked on paint such as auto, truck, bus, equipment enamels, utility boxes, boxcars or similar.
Durable Plastics Fibreglass, polyethylene or polypropylene portable toilets or bathroom partitions, laminated wood.
Unfinished Wood Fences, park benches, plywood, trees, telephone poles, any other uncoated wood.

Specifications/General Properties

Consistency Thin liquid
Coverage Porous surfaces 200-600 sq.ft./gal. Non-porous surfaces 400 to 1000 sq. ft./gal. Bare wood surfaces 150-250 sq. ft./gal.
Use Temperatures Not limited; will work slower at cold temperature.
Storage Store in a cool dry place.
Flammability Container may explode if heated. Keep away from open flame.
Volatility Rapid rate of evaporation. Ventilation required in confined areas.
Biodegradable Yes
Shipping Ship as a Hazardous Material
Effective on the Following Spray on undercoating & metallic paint, spray paint graffities, marker, pen, ink, crayon, shoe polish, lipstick, pencil, decals, and stickers, and most other graffiti marks or stains. Other Uses: Undercoat & Metallic Paint Blaster Graffiti Remover removes road tar, asphalt, oils, greases, gum, wax, tree sap and many other difficult to remove graffiti from durable smooth or porous surfaces or wood. Equipment/tool cleanups: Dried paints, adhesives, caulking materials on equipment, floors, tools, brushes, rollers, paint spills or over sprays can be effectively removed with Undercoat & Metallic Paint Blaster